2897 Series Rubber Seal

The Trim-Lok Series 2897 Ribbed Rubber Seal is custom formulated from EPDM sponge rubber compound to help you get optimal and long-term use out of your seal—whatever your desired application.

Custom order your .300” x .500” square rubber seal with HT standard PSA tape or BT 3M® tape to ensure a strong adherence to vehicle doors, boat hatches, furniture, and many other possible uses.

Both our BT and HT tape options are available in black. Choose from a dual or single roll type from the drop-down box above.

Make sure you have the trims and seals you need, when you need them. We offer our ribbed rubber seals at the lowest prices on the market and are available to talk through any questions you may have about how to apply your sponge seals to applications across a variety of industries, from automotive and marine to manufacturing and more.

• Ozone – Excellent
• Water Absorption - Excellent
• Sunlight Aging - Excellent
• Low Temperature – Excellent
• Compression Set - Good

• "BT" Pressure-Sensitive Adhesive This 3M acrylic, automotive-grade tape creates the ultimate bond to the rubber and the ultimate bond to the substrate. It creates a moisture barrier and airtight seal between rubber and substrate. With the highest peel and shear resistance, it can be used under high loads of stress and force. It has low initial tack for easy re-positioning during installation and needs 72 hours of cure time to come to full bond strength. It is rated for good heat performance from -20°F to 158°F.
  
• "HT" Pressure-Sensitive Adhesive This acrylic-based adhesive is best used to hold the rubber seal in place while installing it in a static application or compressed between two stationary objects. It may be used in some light-duty dynamic applications against a variety of substrates. It is rated for good heat performance from -20°F to 158°F. Please note: During application, the ambient temperature must be above 60°F.