 3M™ BONDED TAPE SYSTEM This tape provides the ultimate bond to the rubber and the ultimate bond to the substrate. It creates a moisture barrier and air-tight seal between a rubber and a substrate. It offers the highest peel-and-shear resistance and can be used under high stress loads and force. It has low initial tack for easy repositioning during installation. It requires 72 hours of cure time to come to full bond strength. It has a good heat performance from -20F to 158F.
3M™ Heat-Activated Acrylic Foam and Acrylic
Plus Tape
|
 |
 STANDARD PRESSURE-SENSITIVE ADHESIVE This acrylic-based adhesive is best used to hold the rubber seal in place while installing in a static application or compressed between two stationary objects. It may be used in some light-duty dynamic applications against a variety of substrates. It has a good heat performance from -20F to 158F.
|
 |
| Description |
Trim-Lok D-Shaped Rubber Seals come in a variety of specially designed shapes made from custom-formulated EPDM sponge rubber compound. Rubber trim seals help to drown out noise, eliminate vibration, and protect from the elements. They provide excellent resistance to water absorption, ozone, sunlight aging, low temperature, and compression set. Use them in automotive or marine applications, as well as in manufacturing, garage doors, windows and more. |
| Resistance to |
- Ozone – Excellent
- Water Absorption – Excellent
- Sunlight Aging – Excellent
- Low Temperature – Excellent
- Compression Set – Good
|
| General Temp. Rating |
-20 degrees to 158 degrees |
| Compression Rating and Density |
Recommended 25% compression for the maximum performance. |
| Flammability and Code Compliance |
FMVSS 302 (Right Click and Select Save As)
UL50 (Right Click and Select Save As) |
 |
This (component or material) is Recognized by UL. Representative samples of this component have been evaluated by UL and meet applicable UL requirements. |
| Adhesive Options |
- "BT" Pressure-Sensitive Adhesive: This 3M Acrylic Automotive grade tape creates the ultimate bond to the rubber and the ultimate bond to the substrate. Creates a moisture barrier and airtight seal
between rubber and substrate. Highest peel and shear resistance can be used under high loads of stress and force. Has low initial tack for easy re-positioning during installation and needs 72 hours of
cure time to come to full bond strength. Good heat performance -20F to +158F.
- "HT" Pressure Sensitive Adhesive: This acrylic based adhesive is best used to hold the rubber seal
in place while installing it in a static application or compressed between two stationary objects. May be
used in some light duty dynamic applications against a variety of substrates. Good heat performance - 20F to +158F. Please note during application ambient temperature must be above +60F.
|
View the Rubber Seal Spec Sheet
|
|
| Part Number |
Top Bend Radius |
Inside Bend Radius |
Outside Bend Radius |
| X135HT |
3.00" |
3.50" |
2.50" |
| OW135HT |
3.00" |
2.50" |
3.50" |
Rubber Seal Installation Instructions
Watch the video to learn how to install an HT or BT 3M D-shaped rubber seal, and download the PDF for installation instructions.
10.1.1
To view our entire catalog of products, download a copy or request a FREE copy by mail.
